Liste der Diskussionsforen
Es ist Dir nicht erlaubt, Nachrichten in diesem Forum zu schreiben. Man muss dazu mindestens den Mitgliedsrang Brain Läufer haben!
NOT a floosie: Ram doesnt have wires sticking out from it.. the item or items you are looking for as there may be two, just stick in to the machine in to prongs... and in all honesty with all the info we are giving you to see if it is the ram it may not be.. Any chance you know anyone at all who is a tad technically inclined on PCs that can take a look?
Ok...I got Rose's picture. I have the three black boards that are on the right. The white things that are on the left in the picture, are going from left to right at the bottom of my board rather than up and down. There is one thing at the bottom right of mine that is white not black (no big deal). There is a flat wire thing connecting the black plastic thing with holes in it which is plugged in there. I've taken it off and reconnected it.
OK, first I'm no tech. I am a "hit that button and see what happens" kind of tech. ;) But if the beeping continues, I'd check the keyboard. If a key is stuck, that will cause a beeping too. If you are still having a problem, try a different key board. ;)
If it's a software problem, one can always reinstall everything. If hardware, and not the keyboard, then I dunno.
If all else fails, there's always the 9-stories solution.
Take the computer up to the 9th floor, open the window, and throw it out.
we determined the beeps already Groucho.. get with the program! hehehe.. Its likely memory or vid card.. either way that beeps are internal not a stuck key
Verändert von NOT a floosie (25. Dezember 2006, 00:48:55)
@ Groucho. Yeah, I'm that kind of fix it person too!
Thanks for everyone's help. It's probably an easy fix, I'm just not that familiar with the insides of these things. I'll work on it after we get my Mom home and when I have more time. *or take Groucho's 9 story solution!
NOT a floosie: ;) Usually when I fix it, I break it more first. ;) I always manage to figure it out but it's like taking a short cut the long way around.
It was a bad RAM that was causing the beeping. There was a sale on a Circuit City, and they were out of the one I needed. It will be in tomorrow, and I'll be back in business!
I can hardly wait. Hopefully, I can start doing some work at home now. I type 97 words a minute and have picked up Quickbooks at work when our accountant decided to quit a year ago.
NOT a floosie: lol, I type 9 or 7 words a minute. ;) lol Actually I think I type about 50 but under pressure it drops. I may go as fast as 60 but it's never sustained very long. I should test it. If I'm typing something that is already written, I think I can do about 45 - 50 with few errors. But 97? That's like super speed! I can't even think that fast.
My daughter just gave me an old computer from work. It's about 5 years old. I don't think I can use it but I'm gonna have something to hack around with and see what kind of trouble I can cause. I'm going to see if I can get it set up for a gaming computer but I think I need XP at least and it may only be able to handle 98SE ;)
NOT a floosie: At least you know which questions to ask :) I'm still learning but am mostly self taught (trial and error). You can find any answer to any question if you word it right. Google is great that way. I learned to air brush photos on the internet and my first one turned out great! lol. People asked where I learned how to do that. Problem is, I can't do it again without the directions. And from a professional's perspective, my work was not that good. But you'd have to know what to look for in order to understand the places I mess up. Mostly it looked pretty good ;)
Thema: I know the answer to this question but want to see if there is an easier way
or if others know the answer too. And for those that run into this situation, you can learn from this ;)
I was sent a picture embedded into Word. You can't right click and save it. I tried that and it didn't work. How does one extract the picture from Word. I tried something and it did work. Anyone know? ;)
Thema: Re: I know the answer to this question but want to see if there is an easier way
Gr☺uch☺: Save the doc as an html page on to your desk top, it will then (or should) create a folder with the photo/picture in there.. Or you can some times click the image click save then go to your graphics program that is open. click new and paste.. most times that works but it can give you a grainy photo for some reason.. but saving as an htm or html page you normallly get the image the way it was intended to look/
Thema: Re: I know the answer to this question but want to see if there is an easier way
Rose: Smartie. ;) That's what I did (saved to a html file). I didn't know it could be done so I just guessed. Pretty cool. Your second idea I think I tried. I right clicked the image but didn't get a save option. ;)
Verändert von clueless36 (30. Dezember 2006, 03:38:46)
This site is very slow for me and wondered if anyone out there has any ideas what the problem could be...I have a desk top dell deminsion 4550..i have a lot of space on the c drive, not sure if that means anything...other sites where i play are not this slow they are "normal" speed..I would like to buy a membership here but it takes me too long to play 20 games..thank you for any help you can provide...i am on dial up..i see 52kbps when i log onto the internet...not sure if this helps or not....
clueless36: I know last night the site went back to giving me white pages after submitting a move, but no error messages about like before. Its as if the lines (maybe the site) were too busy. I have broadband and dont normally have any problems, or when i do at least others do. Last night after submitting a move. the game would go and done would come up in the status bar, then it would just sit there. Then after 10secs, 30secs or more it may carry on. In the end it stopped coming back, but if thats a site or line problem i do not know.
Thema: Re: I know the answer to this question but want to see if there is an easier way
Rose: sure. the quality of a graphic may vary. within word, there is no chance to change and/or increase the quality, because word is not the program one should use to embed graphics. unfortunately, naby people just know word and nothing else. if possible, the graphic should be sent as a graphic and not embedded into word. the average graphic with a good quality on a screen is a 72dpi-jpeg file. to be printed it should be minimum 150dpi. there are many easy-to-handle freeware-progs that help people to view and resize graphics. i recommend e.g. "irfan view"
Seriously, why is the space on my C: drive shrinking by the day, even though i am even deleting programs off it now to try and get some more? Got rid of emails, temp files, you name it....... Defrag wont even run now as i have less than 15% free.
jessica: not that im computer literate as such but I think they are a record of everywhere you have been on the internet...your computer saves "cookies" of where you have been......not the sort you can eat LOL
MadMonkey: have you tried Ctrl,Alt and Delete to see what is running.....sounds like something in the background causing big probs for you....try closing everything down....
I have download a couple movies using utorrent and Mininova, they are .avi files. When I go to play them in any form they are only music files. Does anybody know what is going wrong.
I have downloaded a couple in Limewire, they are mpg or mpeg files and they are just fine and can burn them using Nero. Limewire is just so slow is all ... any advice would be appreciated...thanks
BerniceC: Hopefully someone will jump on here to help better then me - I'm thinking for some movies, you need special codec's loaded to properly view movies. I had to load a lot a long time ago, and since then I have no problem playing just about any more - but I'm pretty sure it's because I loaded all the codec's that I needed.
It's a pack with all of the most popular codec's on it - and says it will allow 99% of movies to play correctly. Again, not 100% sure about this so please don't get mad at me if this blows up your computer or something.
BIG BAD WOLF: I just tried a download using uTorrent 1.6 and the file played fine. It too is an avi. It might help to know what kind of computer etc Bernice has. I'm using Windows Media player 11. ;)
Gr☺uch☺: It depends on the AVI and how it was coded. Different programs use different "codecs" to encode the move in .avi format (or other formats). Some will play on Windows by default, while others will not.
Basicly - some codecs will make files smaller, while others may keep the audio beter, while others will keep the video better. This is at least how I understand it - at least without getting very technical and such.
BIG BAD WOLF: If a person had the latest version of Windows Media Player could they still need a codec to play a particular file? I know that in the past I've had this problem and had to download form the site to update the Player.
Gr☺uch☺: I'm not sure (I don't use the latest version of Windows Media Player) - but my guess is that it is impossible for WMP to have every codec out there - so I would guess that even with the latest, you may sooner or later run into something that needs a codec.
... and I'm far from an expert - I could be wrong in all of this - if so, I'm sure someone will correct me.
I think it's a DivX problem. from the second site:
Guest
This is a super simple fix. I just went through the same problem. all you have to do is download the divx codec. go to divx.com and download the divx codec. its free and will allow you to work. good luck guys
and
I downloaded DivX (free version) and installed it after experiencing the no video problem with .avi files and it solved it.
diogenysos:Thank you so much....downloaded the VLC player and everything is working just perfectly....I downloaded Happy feet as an .avi this morning and all is working well. Groucho Thank you also for your information and it made me feel better knowing that it wasnt just me LOL. I decided to download the player becuase it would have been easier to get rid off if it didn't work, but it is just great, so I am happy.
(verstecken) Du kannst für deine Nachrichten simple HTML-Codes verwenden. Als zahlendes Mitglied kannst du auch den Rich Text Editor verwenden. (pauloaguia) (zeige alle Tips)