Lista keskustelualueista
Sinulla ei ole oikeutta kirjoittaa tälle alueelle. Tälle alueelle kirjoittamiseen vaadittu minimi jäsenyystaso on Brain Lähetti.
diogenysos: Well i think we have found the problem It seems if she boots without her printer connected, its fine (but still slow), but why the printer should be causing a problem i do not know Anyway, i have to go to hers to sort a few things today, so i will have another look
coan.net: Snap, thats the only conclusion i could come up with, thats why i told her to unplug the Ethernet cable. The only other thing she has is a printer, just waiting for her to call back. Crazy things these PC's
MadMonkey: The only thing that quickly comes to mind is some sort of device hooked to the PC is causing it to hang.
As a side note, I just troubleshot a laptop which about every 2 of 3 bootup would hang as it was initializing it. Found the problem to be a newer USB thumb drive that he kept attached to the laptop. He actually had 2 attached - the older one never caused a problem, but with the newer one attached, the bootup process would just hang. Now he just waits until windows boots up before plugging it in.... and remembering to remove it before next bootup.
Now i think i am quite good with Computers, as i spend all day working and repairing them BUT todays problem is a good one i may have to look at tomorrow AGAIN, even though i have just spent 2 hours sorting it out (so i thought)
My sister has a PC with XP running on it at her home. She rang me to say when it boots, it gets to the select user screen, but when you select someone it just sits there, shows egg timer for a bit, then nothing, just stays where it is. It will not let you go past there
She brought the base unit to me today. I managed to get it to boot past there BUT very, very slowly. She had not run a disk clean ever and it had just about 2gb of rubbish on there which i got rid of.
Anyway, after that i downloaded CCleaner & Auslogics Disk Defragmenter so she could run these 2 great programs every so often.
I connected it to my cable, booted it up and logged in as normal, it was fine, just a bit slow if anything, but she does not have much RAM so thats ok.
It worked fine......Now she has taken it home, plugged it in, AND it stuck in exactly the same place. It will not let her get past that select user screen (With or without cable connected).
Problem............Why is it doing it over her house and not here ???
For some reason when i visit a website the print seems very small does anybody know how i can increase the size of the print. For example i was ordering from a clothes catalogue and the text was tiny, never used to be like that.
Czuch Czuckers: I don't know if there is a simpler way, there might be. But what I do is copy the item, put it in Notepad, copy the next item, go back to Notepad and Edit the entry and add the new item.
Then I compose the message around those URL's
(I'm talking about putting links to multiple ponds/tournies in one PM, as an example)
wetware: Havent tried that, but i doubt that that's the problem since that computer didnt work when i had it connected direct to the router either, but of course ill try your suggestion :) thanks
Andersp: Have you tried switching the connections from the hub? Just to make sure that's not the problem. I've had a couple of Linksys devices that have lost some (but not all) of their ports due to nearby lightning strikes and associated power surges--despite their being connected behind a decent battery backup system that offers pretty good clamping. Kaboom! And 4 port devices became 2 port devices.
ellieoop: Never seen the problem before, but i had a look about for it (Google is great for finding errors answers lol) Have a look at this page ip address conflict in essence just follow this start > run > type cmd from the command prompt type ipconfig /release then hit enter.... when that finishes hit the up arrow and make the "release" into "renew" then hit enter, exit from cmd
i have a 1 year old compaq presarrio laptop, starting today i have been getting an alert that pops up on the bottom to the right of start where the icons are, and at least every 10 min. it has a yellow triangle with ! in it and on top it says, windows-system error, there is an ip address conflict with another system on this network, i restarted it, it's still there, i tried clicking it to see if there was any info about it but it vanishes the second i click it. it's working as fast and as perfect as it always does. i also have a mac laptop that's also working fine and there is no alert on that. i know very little about puters but because the mac has no alert and they're both working i would say it has nothing to do with the modem, router or dsl. of course i could be very wrong. can anyone help with this. thx. ellie
coan.net: When i downloaded it i also downloaded the Web Security which runs in the background as the article i read does recommend it (but i guess that for people who have no such software installed)
I also have the software that runs with my Broadband package, thats running all the time as well, but i do not trust it. They want me to upgrade to a paying version.
Thats partly the reason i was interested in the review in the first place
Eriisa: SpyBot actually has a warning when you first start it giving some sort of warning about the Ad-aware program - but I never had any problem.
Also - I DO NOT use any type of feature of any of those program to let them run in the background while I'm doing other things - I simply use them as stand alone scanners. I have not tried the Spyware Terminator yet - but did notice when I went to download, you have to be carefull to get just the Spyware Terminator - and not the one that includes some sort of "web security" which I think runs in the background all the time.
I just use these occasionally to scan my PC.
So if you are running 1 in the background and try to use another one at the same time - then yes, there might be conflicts between the programs.
MadMonkey: Hum... well I will have to give Spyware Terminator a try.
I use both SpyBot & Lavasoft Ad-Aware Personal as "free" spyware scanners. I use both since I have found sometimes 1 will find something the other does not... but always looking for new ones.
or2ak.com: NeroVision can read vro files and export them in another format. It's not free but it comes bundled with in many dvdr packages. Maybe you have that already?
I plug my camcorder in my DVD recorder and burn snippets to DVD. I then take that DVD and put it on my laptop and it plays fine as a .VRO extention but none of my friends can see the video nor can I upload it to youtube.
Gordon Shumway: It's just another format for video file.
I can't help with converting since when I want to watch it on the PC, I just play from the .vro file - or when I want it burned, I just burn the .vro file - I never convert it so I'm no help with that.
coan.net: I thought about that, but i have changed nothing lately. What makes it funnier (or worse to try and sort) is today it is as fast as ever, yet i have altered nothing. Process of elimination says that it may be something one of the Add-ons is getting hooked up on OR something else is taking up the RAM that Firefox needs, but when i look at all the running processes there is nothing and Firefox has all it should need. So whats the problem lol
wetware: I wonder if there is something similar in Firefox? I looked under Tools -- Options, but didn't see anything. I may not be looking for the right thing though.. lol..
MadMonkey: If you have a lot of add on's, it could be one of those that is causing problems. Maybe even disabling a few and testing/playing to see if having certain ones disabled will help the speed
in fact, ive got no idea why this may happen, except firefox being damaged in certain way (probably by using it too frequently, it simply wants to retire in honour), but obviously there are no system- or hardware-problems on your CPU (why should IE run that quickly if you had some...) and as it seems to be a firefox-problem i would recommend to deinstall and reinstall, maybe even an older version of firefox.
One thing that's helped my BrainKing page loading: preventing 400 or so smiley files from having to be re-downloaded from nearly every page I visit here.
In IE7: Tools --> Internet Options --> General --> Browsing History --> Settings --> Check for newer versions of stored pages
If "Every time I visit the webpage" is currently checked on your system, you might want to consider changing that to: "Every time I start Internet Explorer".
I suppose it's possible that something similar could help users of other browsers.
I suppose it's also possible that I'm just an idiot...and no one else would ever set up their browser the way I did!
............has my Firefox started running so slowly ? It is taking between 30 & 40 seconds to load a page. I know Firefox uses a lot of RAM, but this is getting crazy. It just seems to stop when loading a page and i get the dreaded (Not Responding) at the top of the page. I have no clue whats causing, it. I have tried cleaning old files etc... out (but i do that every day anyway), but no effect. There is plenty of room on my hard drive and i have nothing else running. The WORSE thing is that I.E. is fast as hell, when i just run it. Its just Firefox, when ever i run anything else this system is fast as anything. Anyone any ideas why it is on go slow ???
(piilota) Jos et halua muiden käyttäjien näkevän mitä olet tekemässä, voit vaihtaa piilotilaan muuttamalla asetuksia (vain maksavat asiakkaat). (pauloaguia) (näytä kaikki vinkit)